During the OpenSuSE install you can choose custom package collections (or packages). So you can install any of the DEs available and multiple DEs if you want. You can deselect the default DE and chose something else entirely.
It’s not put front and centre as an option like CachyOS seems to be doing but is easily accessed in a submenu.
Only the healthiest of relationships use whatsapp to accuse their partner of theft
The Microsoft strategy often seems to be “It worked well, but we completely redid it because we need to justify out existence. Now it barely works with new bugs”
The price does seems about right to me. The whole sale prices are currently about £75 but looking back prices are usually a bit higher and apparently post-2022 energy shock, average around £80-£94 (ignoring the peak of the energy shock itself). They’re well above the pre 2022 prices, but I don’t think it’s thought likely prices will be coming back to those levels in the near future.
This is run under the “Contract for Differences” framework - when the price is below the minimum price the producers get a subsidy to close the gap (so if it’s £75, the producers get £15 per MWh) but if it’s above the £91.20 minimum price they pay the difference back. It’ll encourage build out, gives the developers stable revenue and predictability and helps smooths out volatility in prices overall.
This is only really a bad price if the average wholesale price is likely to go substantially back down below £80 long term. That doesn’t seem likely as we still have the major drivers of high energy prices: UK wholesale prices are driven by gas prices (as the marginal producer), with reduced cheaper piped gas supplies due to the Ukraine causing a likely permanent reliance on expensive LNG as the new floor for gas prices. So it’s unlikely we’ll go back to the old cheap gas prices from prior to 2022 - even if the Ukraine war ends tomorrow, Europe strategically is not going to rely on Russian gas and will continue to use LNG, and LNG stays the marginal producer (not piped gas even if we use more). That’s not even taking into account the green side of this.
UK whole sale energy prices won’t drop substantially until gas is permanently replaced as the marginal producer (i.e. the last most expensive supplier to provide energy is no longer expensive gas power stations and something cheaper). That won’t happen until wind and solar are ubiquitous and we have good energy storage infrastructure to ensure we don’t need gas whenever renewable production is below what is needed moment to moment. That seems a long way off still (although this wind build out should help move closer) - in the meantime LNG will likely set the UK wholesale prices, and it’s unlikely to get much cheaper than where it is now. If anything, if there is anothere energy shock, it’ll go up.
Apparently cost - made from recycled paper which looked grey as poor quality, so they added a little red dye to make it look better. Then it became a standard, partially as it easily stood out from white and yellow paper in offices. TMYK
More likely he’ll become bitter and blame Biden. If only Trump has gotten in sooner!
So on my linux PC, I have made a KVM (Kernal Virtual Machine) using QEMU and made a Windows 11 machine inside it (and I bought a digital license for it), which I have work office and email set up. I personally only need to use it occasionally. If you give it enough resources it works decently & runs all windows software; although as it doesn’t have a dedicated graphics card it won’t look as slick as native windows 11 machine and run GPU intense software well (you can get it it’s own dedicated video card and pass it through but really isn’t worth it for just using Excel). It means I can main linux but use Windows occasionally if I really have to. It means you can have a full Windows machine with work Microsoft account set up for Office, One Drive etc - depending on your employers policies of course. You can cut down the resources you allocate it if you want to be switching between the Windows machine and other software in Linux, but Windows can be laggy without enough resources as it’s so poorly optimised.
There are sites that guide on setting up a windows 11 machine in linux, but essentially you need to install KVM modules and Virtual Machine manager in linux (available on all distros). You do need to access your PCs bios to ensure the settings that allow virtual machines to access the CPU are on (slightly different name between AMD and Intel CPUs).
Then you create a machine in Virtual machine manager, give it plenty of resources (especially if the idea being when you use it if it’s the only think you’ll be doing, give it access to most of your CPU cores and the majority of your RAM), and create a decent size virtual hard drive file (I’d say minimum 128gb or more as Windows is bloaty - you can set the virtual drive file size to be flexible so it has a max size but the actual file size is only what is used by the guest system but some file systems still use the whole space unfortunately; not sure how Windows behaves). Download the Windows 11 installer ISO, and then add that file as a virtual CD drive for your guest machine, boot the guest machine, and you should get the Win 11 installer. The VM can only see the virtual hard drive file, so you can install Win 11 safely onto the drives it sees with no risk to your PC. Then reboot and you should have a new Windows install; test it - if it works, buy a digital license (if you want…) and install Office using your 365 account OR if you have old CDs then pass those through to the virtual machine and install as on any Windows PC.
My guess would be the unrest in Iran and the regimes attempts to shut down the internet in that country to prevent organisation?
Yeah it can be confusing; Flatseal makes it easier as it’s a GUI way of doing what is otherwise command line with flatpak itself but it still assumes some knowledge about what you’re doing and can be a bit of trial and error. The more you expose to the sandbox, the more “native” performance you can achieve but it’s at the expense of security.
In Flatseal you can set global options for all apps, or individual apps. For graphics, in the Device section, toggling the option to make the GPU available to the sandboxes may be needed - “GPU Acceleration” in the Device section. That one option can be pretty effective as GPU hardware acceleration is often important, if not essential, for programs like Handbrake (which are video transcoding).
This is equivalent to “device=dri” when launching the flatpak via the commandline.
I game on Linux but these are all FOSS and multiplatform:
There are also dedicated open source engines for old games like OpenTTD for Transport Tycoon Deluxe, and OpenMW for Morrowwind
I support KDE, Mozilla and a fediverse instance currently. A small amount to each, each month, but it is worth it to me. I pay for VPN, email, and password manager, so contributing to KDE, Mozilla and the fediverse feels just like another small set of subscriptions.
I’m lucky I can afford to do this; I think any financial contribution of any size is appreciated by the FOSS world.
EDIT: In terms of things I’m thinking of - Jellyfin and maybe Piefed. Mozilla is a bit of a question mark for me with the AI stuff; but I still value Firefox immensely.
My rebuttal is “your mom is a b***h”. Cut contact as soon as you can; you don’t need someone like that in your life. She doesn’t value other human beings, and she doesn’t have empathy for the suffering of others. She sounds like a nasty person to be around and all she will do is bring you down - either through her constant negativity or though her hatred of others.
You don’t need to rebut her words - she is an adult and has made her choices - you just need to accept she is not a good person and move on as soon as you can.
I’m not aware of general Linux specific tools for this (game specific ones do exist). However:
They both work by you running them in wine and pointing them to the game files created by Steam (or Gog or any windows game installed via Wine or Proton) in the Linux filesystem (e.g. /home/yourname/.steam/steamapps/common/game) instead of windows filesystem (e.g. C:\program files\game)
Modloaders with “bootstrap” fixes will also work; they just have to be installed and run in the same proton/wine prefix as the game. I.e. if you install Cyberpunk 2077 via steam, the bootstrap type mods need to be installed into the game folder or fake-windows file system that Proton makes for the game. It even has it’s own “drive C” folder for the rare times you need 3rd party tools. You also put tools into the game folder as you would on windows. If it has it’s own custom exe you can tell wine/proton to run that instead of the game or even before the game in the same prefix.
I mod games extensively on Linux; they work just as they do in Windows. I’ve played heavily modded Cyperpunk 2077 to completion (all the mod tools work via proton - that takes a little tweaking to get working but is doable - and many mods you just drop into specific sub folders; I played with about 50 mods and I didn’t find a single one that didn’t work on Linux specifically), Stardew Valley, Rimworld and Minecraft for example of bredth. Stardew, Rimworld and Minecraft even have linux specific tools to help.
This is less a case of games run via Linux not being moddable, and more that it has it’s own learning curve (in the same way modding on Windows has a learning curve). Once you understand how the linux filesystem and how proton/wine work, the world is your oyster. Protontricks and Winetricks are not just useful for getting games running or tweaking them, they’re a modders best friend.
I loved CS1 and have had CS2 since launch. I just can’t get into CS2 - it’s just not fun.
A large part of that is Paradox Mods in CS2. When CS1 launched from day one you could go onto the steam workshop and download player made models - houses, offices, train stations, roads etc. It grew rapidly and continuously, and it meant every city you made you could customise and change. The game was constantly refreshing and fun, and you could make whatever you wanted.
For CS2, 2 years on and you still can’t add custom assets to the game. Paradox/CO have released themed region based asset packs that they have made and the mods are there, but the player made assets remain largely missing. And I suspect the reason is Paradox Mods and the upcoming console version - the PC version seems to have been held back from being good so Paradox can get it’s console launch. There seems to be a fundamental lack of understanding that the player made content was what made CS1 so great. I suspect CO get that, while Paradox only cares about DLC.
Wow this is terrible news. Basically Paradox owns the IP to Cities Skylines and Colossal Order seemingly want out.
I’d say a large reason CS2 has been such a mess is because it was rushed out, the paradox mod system is just not fit for purpose and there remains a ridiculous focus on getting the console version released + move on to DLCs rather than fixing the main game. I’d put most of the blame on Paradox’s shoulders to be honest.
It’ll be interesting to see what CO does next. CS1 was a great game, CS2 could have been a great game. Will they do another city sim or more onto something else? Seems a shame if they move on as they have grown so much expertise in the genre. I’m hoping they’re cutting free to do a game with their own vision, which was how CS1 came to be.
It’s not about the item whatever it is, it’s about your reaction to it. This was something your spouse got you to show you that they love you; they bought something they thought you would want and need because they see you using this item all the time. It doesn’t matter that they know you like using old things - for them the thing they got you is an expression of their love for you, and your reaction (lets return it, I don’t want it) is like rejecting their love and is insulting.
I don’t know how you said it to your spouse but the way you’ve described it here your reaction sounds like it was entirely factual and emotionless. It may not be what you’re saying but how you said it that is the issue. Did you acknowledge how kind and thoughtful the gift was? Did you acknowledge what it means to get a nice gift from your spouse before saying that actually it’s not something you’d use?
Instead of seeing it as a tit-for-tat exchange and the same as you gifting t-shirts, you need to understand that this was a personal gift from your spouse. You also need to acknowledge you’re difficult to get gifts for because you like old things. You’re not the bad guy for wanting to return the item, you’re likely the bad guy for how you’ve gone about it and hurting your spouses feelings in the process. It may be that you’re not an emotional person or have difficulty reading other people including your spouse - that’s fine but you may need to acknowledge that you’ve hurt their feelings even if you didn’t realise or mean to, and apologise - that may help a lot. It would also be helpful to tell them how your mother-in-laws gift has sentimental value and you didn’t want to replace it. It may still be that you end up returning the item - but it’s far less important that your relationship with your spouse.
Did you set your Mint to autologin to desktop? If so then your Keyring is then locked and you get prompts to unlock it when you want to use anything that needs it - websites, software like email etc. The keyring holds your passwords and credentials to pass to on as needed and keeps your system secure. If you set your desktop to not autologin - i.e. have a login screen - your keyring is unlocked automatically as you log on to the PC and you don’t keep getting prompts to unlock the keyring. You can disable the keyring entirely or give it a blank password, but it’s better to use the login screen to keep your device secure, and let the keyring do it’s thing in the background even though “login automatically” is so easy to tick and use. The wallet is the same concept on KDE desktops.
Otherwise the only password prompts you should get are similar to windows - when you want to make system level changes.
I’d recommend OpenSuSE Leap with KDE. User friendly, stable, with a good GUI for making all system changes. Fedora KDE is also a good popular distro; I’m not sure how good it’s GUI is but I’d be surprised if you need to use the terminal. People often recommend the terminal (because it IS quicker - often one step instead of “go here, click here, click here”) but there is usually a GUI way of doing everything.
The a specious quote. That implies that all gain can only be at a cost for someone else. Instead of the conservation of mass, we’re talking the conservation of misery. It’s nonsense.
This is certainly a part of the problem. The other side of the coin is “why bother when it’s going to be streaming”. It’s a perfect storm of a terrible experience in cinemas and easy access to streaming in the comfort of your own home. At home I have a perfect view on my big screen TV, can control the lighting, the temperature, the food, and the audience. Cinemas feel like they’re in a death spiral - they make less money so they pump in even more ads and increase fees making the experience worse, which puts off even more punters, so they make even less money.
Hollywood is largely to blame as the article mentions briefly - the 90 day exclusive window for cinemas to show films created an incentive for people to go out and see them, made the cinemas and the studios lots of money, and made movies “special” - they were an event like going to the theatre or going out for dinner. Now going to the cinema feels more like an event such as catching dysentery.
Since the pandemic, the studios have devalued their own product. If you want to see a movie, you just have to wait a couple of weeks and it’ll be available to rent to stream from home. It costs less to rent a movie than go out to the cinema with a much better experience, and Hollywood gets a smaller cut of that. But lots of people don’t even bother with that - for the vast majority of movies you might as well wait until it ends up on a streaming service like Netflix, where Hollywood makes even less.
If Hollywood wants to save itself, it should listen to the cinema chains and extend the exclusive period back to 45 days (or even 90). If you want your product to be premium, it needs to be a premium experience.
Wow it really is heading towards crisis point when you have people saying “keep feeding the beast or it’ll eat us”.